Ahead of Computex 2018 CRYORIG announces new M.2 cooler Frostbit and RGB enhanced C7 RGB CPU Cooler. CRYORIG’s Frostbit is not only the industry first aftermarket M.2 NVMe SSD cooler with dual heatpipes, it allows full adjustment of the Secondary Heatpipe and large volume Heatsink. The C7 RGBis based on CRYORIG’s award winning ITX cooler C7, with a 12v RGB lighting enhanced 92 mm fan. Both products will be shown at CRYORIG’s Computex booth at Nangang Exhibition Hall I0527.
The Frostbit is the first aftermarket M.2 cooler using the heatpipe technology. It’s Dual Stacked Heatpipes work cooperatively to form a massive heat dissipation surface. The First 1 mm Ultra-Thin Heatpipespreads heat from components into the Primary Heat Spreader. The Secondary Heatpipe is then attached to draw heat further into a large volume Heatsink. The Frostbit’s Heatsink can also be adjusted to fit different PC setups. The Secondary Heatpipe’s angle can be manually tilted to either side to avoid interference with the GPU or a large CPU coolers.
Based on one of the best ITX coolers on the market, the C7 RGB adds 12v RGB lighting to an already stellar performer. With the C7 RGB being a top-flow cooler, once lit up the C7 RGB becomes the lighting center piece of any ITX build. The C7 RGB lighting system is built on standard 12v RGB LEDs integrated in its 92 mm PWM fan. Simply plug in the Fan RGB header into either a 12v RGB port on the mainboard or any 12v RGB lighting controller. It is compatible with all major 12v RGB controllers and boards.
Both the Frostbit and C7 RGB, as well as further upcoming products from CRYORIG, will be shown at Computex 2018 in Nangang Exhibition Hall I0527 beginning on June 5th to 9th.
|Dimensions||L72 x W26,3 x H57 mm|
|Heatpipes||1 x 6 mm Heatpipes, 1 x 1 mm Ultra-Thin Heatpipe|
|Fin||T = 0,4 mm; Gap = 2,4 mm|
|Fin Pcs||19 x 2 = 38 pcs|
|C7 RGB Specification|
|Dimensions with Fan||L97 x W97 x H47 mm|
|Weight (with Fan)||357 g|
|Heatpipes||4 units 6 mm Copper Heatpipes|
|Fin||T = 0,4 mm; Gap = 1,2 mm|
|Fin Pcs||57 pcs|
|Dimensions||L92 x W92 x H15 mm|
|Rated Speed||600 ~ 2500 RPM ±10 %|
|Noise Level||30 dBA|
|Air Flow||40,5 CFM|
|Air Pressure||2,8 mmH2O|
|RGB Lighting||12 V|