The cooler is attached to the backplate with six screws, to remove the cooler completely you need to disconnect power connectors for the fans and RGB.
As we can see the new cooler has 3 nickel-plated copper heat pipes with an aluminum dual fin-stack heatsink. The GPU core contacted by a giant copper base plate and the RAM and VRM also covered by a baseplate for maximum heat dissipation.
is a giant aluminum plate with two copper heatpipe to carry heat from the core to the outer areas of the cooler. It also covers all RAM chips and VRM.
The custom PCB design holds a 4+2 VRM setup powered by an 8-pin and 6-pin connector.